Справочник Пользователя для briggs--stratton 5900861

www.SnapperPro.com

Regular Maintenance

 1.  Park the machine on a smooth level surface such as a 

concrete floor. Disengage the PTO, engage the parking 
brake, turn off the engine and remove the ignition key.

 2.  Lower the mower deck to its lowest cutting position.

 3.  Measure the coil length of the mower belt tensioner 

spring (A, Figure 46). The measurement should equal 
7-1/4” (18,42 cm). If the measurement does not equal 
7-1/4” (18,42 cm), adjust the anchor eyebolt (B).

 1.  Loosen the jam nut (C).

 2.  Turn the adjustment nut (D) until a measurement of 

7-1/4” (18,42 cm) is achieved.

 3.  Retighten the jam nut.

Not 

for  

Reproduction