Справочник Пользователя для Crestron cnmsx

Crestron CNMSX 

Integrated Control System

 

Before installing any tools, confirm that all applications such as Microsoft Office, etc. 
are closed. The website and CD provide instructions for installing the various 
development tools. When initiating a custom install from the CD, the user is 
presented with a list of the software programs, documentation, and other resources 
available on the CD-ROM. For each item, set or clear a checkbox to the left of the 
item to direct the installation program whether to install that component onto the hard 
drive. The size of the items installed determines how much hard disk space is 
required.  

Each development tool contains a help file that can be opened from the Help pull-
down menu. Refer to these files for additional information.  

The CNMSX has non-volatile and volatile memory. Non-volatile memory contains 
information that is retained after loss of electrical power. Volatile memory is lost after 
a power failure. Refer to the lists below for a breakdown of memory for program-
related information stored in the CNMSX.  

1.  SIMPL+ Modules (always permanent) 

2.  SIMPL+ Variables  

3.  SIMPL Program (after written to permanent memory) 

4.  Ops, Monitor, TCP/IP Stack 

5.  Signals explicitly written to NVRAM (by symbols such as RAM, 

RAM2, SMEM, SMEM2, RAMPNV, DRAM, etc.)  

1.  Digital, analog and serial signal values 

2.  SIMPL Program (prior to writing to permanent memory) 

NOTE:  For the Ethernet IP setup of the CNMSX with the optional CNX Ethernet 
expansion card, refer to the CNXENET or CNXENET+ Operations & Installation 
Guide (latest revision of Doc. 8129 or 8153, respectively) for further information.  

After installing the desired development tool, various job files may be obtained from 
Crestron or other sources. Using Windows Explorer, complete the following steps. 
These steps ensure that all job files reside on the hard drive (C:) in a directory 
named \CRESTRON\PROJECTS\MYJOB.  

1.  Navigate to the SIMPL directory on the hard drive. Assume that the 

default install directory is C:\CRESTRON.  

2.  Create a new folder for the project files. Although the folder where the 

files are placed is not critical, it is easier to manage projects if a logical 
structure is created. For example, create a new folder, called 
PROJECTS, underneath the CRESTRON directory. Create another 
folder, called MYJOB, under PROJECTS for the current job. The 
resulting pathname is C:\CRESTRON\PROJECTS\ MYJOB.  

•  19