Справочник Пользователя для Zebra 49834
Operations
Load Ribbon
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
57
Load Ribbon
Use ribbon with thermal transfer media. The ribbon must be coated on the outside and wider
than the media. If the ribbon is narrower than the media, areas of the printhead are unprotected
and subject to premature wear.
than the media. If the ribbon is narrower than the media, areas of the printhead are unprotected
and subject to premature wear.
identifies the ribbon system components inside the media compartment of a
right-hand print engine. A left-hand unit contains a mirror image of these components.
shows the print engine with ribbon loaded.
Figure 35 • Components for Ribbon Loading
1
Ribbon supply spindle
5
Printhead assembly
2
Ribbon take-up spindle
6
Locking pin
3
Upper ribbon guide roller
7
Lower ribbon guide roller
4
Printhead latch
1
2
4
5
3
7
6