Справочник Пользователя для Crestron cnxvga

Every equipment and user interface within the control system network requires a 
unique identity code (NET ID). These codes are recognized by a two-digit 
hexadecimal number from 03 to FE. The NET ID of each CNXVGA has been 
factory set to 38.  

If the application requires it, there are several ways to change the NET ID of a 
CNXVGA in the control system using the PC via VisionTools™ Pro or SIMPL™ 
Windows

. Complete the following steps to change the NET ID.  

1.  Disconnect all network devices from the control system, except for the 

one CNXVGA that needs to have its NET ID code changed.  

2. Select 

Tools | ViewPort to open the “Crestron Performance Viewport” 

dialog box.  

3. Select 

Functions > Set Network ID. The software checks the baud 

rate and then opens the “Set Network ID” dialog box.  

 

4.  Notice the list of current network devices in the dialog box. Highlight 

the CNXVGA. 

5.  The NET ID of the CNXVGA (default NET ID is 38) appears in the 

box below the list. Use the scroll arrow to assign another NET ID.  

6.  When the newly assigned NET ID appears, select the Set ID button to 

initiate the change.  

7.  The software responds with a successful message to confirm the new 

NET ID.  

8.  To verify this procedure, select Diagnostics | Report Network 

Devices. Confirm that the CNXVGA has a new NET ID code.  

9.  Reconnect other network or modular devices that were disconnected in 

step 1.  

•  Expanded Video Adapter: CNXVGA