Справочник Пользователя для Crestron qm-rmcrx-ba

Crestron QM-RMCRX-BA   

         QuickMedia™ Receiver/Processor

 

 

Two 2-pin isolated relay connectors are provided for controlling low voltage 
contact closure devices such as drapes, screens and lifts. Each connector is 
rated 2 A @ 50 V. 

The QM-RMCRX-BA front panel indicators are described as follows.  

This LED indicates an established QuickMedia link. 

This red LED indicates COM A port activity. 

This red LED indicates COM B port activity. Constant blinking indicates that 
the port is used for remote console connection. 

This red LED indicates IR port activity. 

This red LED indicates input activity. 

This green LED illuminates when the unit is connected to and receives 24 VDC 
power from an external power pack or from Cresnet.  

This yellow activity LED illuminates when the QM-RMCRX-BA detects 
Crestron Ethernet traffic (i.e., XPanel™).   

This yellow LED illuminates when the QM-RMCRX-BA communicates with 
Cresnet devices on the network, and also indicates that the SIMPL Windows 
program currently loaded has a network device defined at the same network ID 
as the QM-RMCRX-BA.   

Two buttons are provided on the front panel of the QM-RMCRX-BA. Refer to 
the following descriptions. 

Pressing this button initiates system hardware reset. (Same effect as 
disconnecting and reconnecting power.)  

• 13