Справочник Пользователя для INSTEON 2342-232
Page 13 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM
Fast-Off
Red Blink for ~3 Seconds
Scene Acknowledge Missing
LED
Always used for setup, default On during use
Setup Button
Yes
On/Off Switch
Yes
Beeper
Yes, configurable
Battery Charging LED
Yes, Embedded (shines red through case during charge)
RF Range
50’ Line-of-Sight
RF Frequency
915MHz (US)
869MHz (EU)
921MHz (AUS/NZ)
Retains all settings without power
Yes, all saved in Non-volatile EEPROM
Mechanical
Color
White
Plastic
UV Stabilized ABS
Dimensions
2.6" H x 1.3" W x 0.39" D
Weight
1 Oz.
Button Style
Plastic Paddles over Contact Switches
Optional Hardware
Wall Mount
Tabletop Stand
Visor Clip
Operating Environment
Indoors, 32°F to 104°F, up to 85% relative humidity
Electrical
Battery type
3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
Battery life (between charges)
9-12 months under standard usage
Battery Re-charging cycles
> 500 recharging cycles
Recharging jack
Standard, Micro-USB, 5VDC
Recharging time
1 hour
Troubleshooting
Problem
Possible Cause
Solution
Mini Remote won’t add a
scene responder
scene responder
Mini Remote may be out of range of
nearest dual-band INSTEON device
(hopper)
nearest dual-band INSTEON device
(hopper)
Try moving an access point or other dual-band
plug-in module closer to Mini Remote
plug-in module closer to Mini Remote
The INSTEON signal may not be
getting to the “vicinity” of Responder
getting to the “vicinity” of Responder
Make sure phases are bridged, add additional
INSTEON devices and/or move around existing
INSTEON devices
INSTEON devices and/or move around existing
INSTEON devices