Справочник Пользователя для INSTEON 2476d

 

If you have installed older Smarthome Plug-In BoosterLinc™ X10 Signal Boosters or certain other 
BoosterLinc-enabled products, the older BoosterLinc technology may interfere with INSTEON 
communications. 

Plug-In BoosterLinc X10 Signal Boosters, Smarthome  #4827, shipped after February 1, 2005, with V3.0 
or later firmware, are fully compatible with INSTEON. 

The following Plug-In BoosterLinc X10 Signal Boosters use older firmware that may cause interference 
with INSTEON:  

•  White BoosterLinc X10 Signal Boosters, #4827, shipped before February 1, 2005, with V2.5 or earlier 

firmware 

•  All Gray BoosterLinc X10 Signal Boosters, #4827 

Try unplugging the older BoosterLinc X10 Signal Boosters to see if this helps with INSTEON interference.  
If it does, please call 800-SMARTHOME (800-762-7846) for help with replacing your older BoosterLinc 
X10 Signal Boosters with newer INSTEON-compatible ones. 

The following pre-INSTEON SmartHome products have BoosterLinc technology that you can turn on or 
turn off when you set the X10 Address for the product.  If turned on, the BoosterLinc technology may 

INSTEON. 

interfere with 

 

To disable BoosterLinc X10 Signal 
Amplification on these products: 

1.  Press and hold the SET Button. 

2.  Send the X10 Primary Address. 

3.  Send an X10 OFF command. 

You can send an X10 ON command in
Step 3 to re-enable the BoosterLinc
feature. 

•  KeypadLinc™ 6 with Integrated Dimmer,  

#12073W, #12073WB and #12073WW 

 

•  SwitchLinc™ Relay 2-Way,  

#23883 and #23883T 

 

•  ToggleLinc™ 2-Way Dimmer,  

#23890, and Switch, #23893 

 

If you have any of these products and the BoosterLinc feature is turned on, please consult your User’s 
Guide or call 800-SMARTHOME (800-762-7846) for help with turning it off.  You may then wish to install 
newer INSTEON BoosterLinc X10 Signal Boosters, which Smarthome can help you with. 

If your existing X10 devices seem to be working less reliably after installing INSTEON devices, remember 
that INSTEON devices can absorb X10 signals just as X10 devices do, and that INSTEON devices do not 
repeat X10 signals.  Installing INSTEON-compatible BoosterLinc X10 Signal Boosters, Smarthome 
#4827, or a SignaLinc Plug-In Coupler-Repeater, #4826, can increase X10 signal levels. 

Please call 800-SMARTHOME (800-762-7846) if you have any questions or would like more help. 

Page 30 of 35