Справочник Пользователя для Radio Shack talking 360

18

Operation

Pressing 

 once reduces the display's brightness by half; the

voice alert says “Display dim.” Pressing 

 a second time re-

duces the display's brightness by 90%; the voice alert says
“Display dark.” Pressing 

 a third time returns the display to

full brightness; the voice alert says “Display bright.”

While the detector sounds a radar or safety alert signal, press

 to temporarily silence the detector. When you press

, the voice alert says “Mute on” and 

 appears. The detec-

tor automatically resets the mute to off 20 seconds after the ra-
dar or safety alert signal stops. Or, press 

 again before it

resets, and the voice alert says “Mute off” and 

 disappears.

Note: The laser alert signal remains audible even if you press

.

VG-2 mode is preset to off. To turn on VG-2, hold down 

until the voice alert says “VG-2 on” and 

 appears.

To turn VG-2 off, hold down 

 until the voice alert says

“VG-2 off” and 

 appears.

When your detector senses a radar signal, 

, 

, or 

 appears.

An alert tone for the type of band detected sounds, and the dis-
play shows the signal strength in numeric form.