Справочник Пользователя для Iomega 333401
14
Installing Your Internal Tape Drive
Installing Your Internal Tape Drive
Installing Your Internal Tape Drive
Installing Your Internal Tape Drive
Installing Your Internal Tape Drive
Using this section as a guide, you will be able to
install your new internal tape drive. Installation of
the tape drive requires three basic steps:*
install your new internal tape drive. Installation of
the tape drive requires three basic steps:*
1
Preparing your computer
2
Preparing the drive
3
Connecting the drive to the computer
To complete this project you will need a phillips
screwdriver and, perhaps, a flathead screwdriver. We
also recommend that you set your computer on a
table (not the floor) to install the drive.
screwdriver and, perhaps, a flathead screwdriver. We
also recommend that you set your computer on a
table (not the floor) to install the drive.
*If you are installing a Ditto Dash accelerator card (an optional accessory for
the Ditto 2GB, Ditto Easy 3200, and Ditto Easy 800 drives), see the Ditto
Dash Installation Guide and install the card before installing the drive.
the Ditto 2GB, Ditto Easy 3200, and Ditto Easy 800 drives), see the Ditto
Dash Installation Guide and install the card before installing the drive.
If you are installing the Ditto Max drive, follow the instructions in this
manual to install the Ditto Dash DX accelerator card.
manual to install the Ditto Dash DX accelerator card.
Getting Started
Getting Started
Getting Started
Getting Started
Getting Started
Unpack the tape drive and accessories onto a table.
Caution: Touch a grounded metal object (like a metal cover screw on your
computer) to discharge personal static electricity before handling the tape drive.
computer) to discharge personal static electricity before handling the tape drive.
Tape Drive
Iomega Backup Software
(Actual contents may not match illustration)
Tape Cable
Mounting Screws