Справочник Пользователя для Lumiscope 1131

Скачать
Страница из 17
7
Applying the arm cuff
1.  Plug in the cuff connecting tube into the unit.
2.  Unwrap the arm cuff, leaving the “Index” end of the cuff through the D-ring of the cuff.
3.    Put your left arm through the cuff loop. The "OK" range indication should be positioned closer 
to yourself with the rubber tube pointing in the direction of your arm. Position the artery mark 
(    ) over the main arteries (on the inside of your arm) in the upper arm.  
4.  Turn your left palm upward 
and place the edge of the arm 
cuff 
at 
approximately 
to 
cm above the inner side of the elbow joint. 
Tighten the cuff by pulling the "Index" end 
of the cuff.  
5.  If the Index line falls within the OK range, 
indicated  at  the  edge  of  the  cuff,  this  cuff 
is 
suitable  for  your  use.  If  the  Index  line  falls  out 
of 
the  OK  range,  you  may  need  a  special  cuff 
for 
measurement.  Please  visit  www.lumiscope.net 
or 
contact 
our 
service 
department 
at 
1-
800-672-8293 for more information regarding 
y
y
y