Справочник Пользователя для IBM powerpc 750gx
User’s Manual
IBM PowerPC 750GX and 750GL RISC Microprocessor
Page 20 of 377
gx_preface.fm.(1.2)
March 27, 2006
Conventions Used in This Manual
Notational Conventions
mnemonics
Instruction mnemonics are shown in lowercase bold.
italics
Italics indicate variable command parameters. For example: bcctrx. Book titles in text are
set in italics.
set in italics.
0x0
Prefix to denote a hexadecimal number.
0b0
Prefix to denote a binary number.
crfD
Instruction syntax used to identify a destination Condition Register (CR) field.
rA, rB
Instruction syntax used to identify a source General Purpose Register (GPR).
rD
Instruction syntax used to identify a destination GPR.
frA, frB, frC
Instruction syntax used to identify a source Floating Point Register (FPR).
frD
Instruction syntax used to identify a destination FPR.
REG[FIELD]
Abbreviations or acronyms for registers are shown in uppercase text. Specific bits, fields,
or ranges appear in brackets. For example, MSR[LE] refers to the little-endian mode
enable bit in the Machine State Register.
or ranges appear in brackets. For example, MSR[LE] refers to the little-endian mode
enable bit in the Machine State Register.
x
In certain contexts, such as a signal encoding, this indicates a don’t care.
n
Used to express an undefined numerical value.
¬
NOT logical operator.
&
AND logical operator.
| OR
logical
operator.
Indicates reserved bits or bit fields in a register. Although these bits can be written to as
either ones or zeros, they are always read as zeros.
either ones or zeros, they are always read as zeros.
0 0 0 0