Справочник Пользователя для National Instruments PXI-8170 Series

Скачать
Страница из 67
Chapter 1
Introduction
1-4
www.ni.com
hard drive. The mechanical assembly of the PXI-8170 mounts these devices 
to the PXI-8170 main board so you can remove the entire unit intact. This 
eases integration issues and cabling. The PXI-8170 plugs directly into the 
system controller slot and expands to the left, thus preserving all usable PXI 
slots for user-defined peripheral devices.
PXI-8170 Series Models
Currently, the PXI-8170 Series consists of a 450 MHz Pentium III model 
and a 700 MHz Pentium III model.
The PXI-8170 comes complete with a 3.5 in. 1.44 MB floppy drive, Super 
VGA with 2 MB SGRAM, a serial port, an IEEE 1284 parallel port, a PS/2 
keyboard and mouse, a USB connector, and software installed.
Memory
The PXI-8170 and its memory sockets are easily accessible so you can 
install additional DRAM in the field. You can install up to 256 MB of 
10 ns SDRAM, using two 144-pin SO-DIMMS.
For information on adding RAM by installing SO-DIMMs, refer to 
Appendix B, 
Hard Drive
The PXI-8170 contains at least a 4 GB internal, enhanced IDE hard disk. 
System Slot Functionality
You can use the PXI-8170 computers to achieve full PXI system slot 
control of your PXI system. In the system slot, the PXI-8170 provides 
master/slave capabilities to all slots in the PXI system.
Front Panel Features
The PXI-8170 Series has the following front-panel features:
Internal 3.5 in. floppy drive
System reset push-button (hold for ~ 2 seconds for reset to assert)