Справочник Пользователя для Namco Bandai Games 90500146
Page 42
4-6
Fitting the Pedal Assemblies
1.
Remove 2off security screw (M5x12) and remove the Joint Bracket from the
Pedal Assy. (Take care not to lose the screws as these will be used to fit the
Pedal Assy.
2.
Fit the Joint bracket to the Coin Tower Assy, finger tight only, with the 2off
security screw (M5x12)
3.
Connect the connector and fit the Pedal Assy to the brackets, taking care not to
trap the wires, with 4off security screw (M5x12), ensuring that the Pedal Assy is
fully down to the floor.
4.
Fully tighten all security screws (M5x12)
Security screw (M5x12)
Joint Bracket
Pedal Assy
Pedal Assy
Gun Tower Assy
Security screw (M5x12)
Security screw
(M5x12)
(M5x12)
Connector