Справочник Пользователя для Weber SUMMIT 650
1
3
2
1
3
2
6
Crossover Ignition System
LIGHTING
Crossover Ignition System
Summit 450
Summit 650
EACH HEAT ZONE OPERATES INDEPENDENTLY
Summary lighting instructions are on the control panel.
DANGER
Failure to open the lid while igniting the barbecue’s
burners, or not waiting 5 minutes to allow the gas to
clear if the barbecue does not light, may result in an
explosive flare-up which can cause serious bodily
injury or death.
burners, or not waiting 5 minutes to allow the gas to
clear if the barbecue does not light, may result in an
explosive flare-up which can cause serious bodily
injury or death.
Crossover Ignition® System
Note - The Crossover Ignition System ignites the Front
burner with a spark from the igniter electrode inside the
Gas Catcher™ Ignition Chamber. You generate the
energy for the spark by pushing the Crossover Ignition
Button until it clicks.
burner with a spark from the igniter electrode inside the
Gas Catcher™ Ignition Chamber. You generate the
energy for the spark by pushing the Crossover Ignition
Button until it clicks.
WARNING: Check hose before each use of
barbecue for nicks, cracking, abrasions or cuts. If the
hose is found to be damaged in any way, do not use
the barbecue. Replace using only Weber authorised
replacement hose. Contact the Customer Service
Representative in your region using the contact
information sheet provided with your manual.
barbecue for nicks, cracking, abrasions or cuts. If the
hose is found to be damaged in any way, do not use
the barbecue. Replace using only Weber authorised
replacement hose. Contact the Customer Service
Representative in your region using the contact
information sheet provided with your manual.
1)
Open the lid.
2)
Make sure all burner control knobs are turned OFF.
(Push control knob down and turn clockwise to
ensure that it is in the OFF position.)
(Push control knob down and turn clockwise to
ensure that it is in the OFF position.)