Справочник Пользователя для Line 6 AXSys 212
Description of Features: Chapter 3
AxSys 212 User Manual
29
If the
EQ ON/OFF
parameter is turned off, the Graphic EQ will not have any effect
on the Sound (see page 35). If you adjust any of the Graphic EQ parameters, the
display will flash
display will flash
OFF twice to indicate it is turned off.
Tremolo
Mono Tremolo
2
fluctuates loudness, and Stereo Tremolo alternates
loudness in opposite channels. On slow speeds with a soft shape, stereo
tremolo provides continuous panning. At low to moderate depths and
moderate speeds, itÕs like the sound of classic electric piano tremolo.
tremolo provides continuous panning. At low to moderate depths and
moderate speeds, itÕs like the sound of classic electric piano tremolo.
Parameter
Range
Description
Tremolo Type
Off, 1 to 3
Selects the type of Tremolo effect (see below).
Tremolo Speed
00 to 99
Controls the rate at which the sound changes amplitude.
Tremolo Depth
00 to 99
Controls how strong the tremolo will be.
Tremolo Shape
00 to 99
Selects either soft (gradual) or hard (drastic) transitions.
The
TREMOLO TYPE
lets you choose from the following Tremolo types:
Display Tremolo Type Description
OFF
No Tremolo
Tremolo is disabled.
1
Mono Tremolo
Provides the classic Tremolo useful in recreating the
sound of older guitar amps.
sound of older guitar amps.
2
Stereo Tremolo
at 90
at 90
°
This two channel Tremolo has the left and right channels
close together; i.e. when one is on, the other is 1/2 on, and
when one is off, the other is 1/2 off.
close together; i.e. when one is on, the other is 1/2 on, and
when one is off, the other is 1/2 off.
3
Stereo Tremolo
at 180
at 180
°
This two channel Tremolo has the left and right channels
perfectly out of phase; i.e. when one is on the other is off.
perfectly out of phase; i.e. when one is on the other is off.
Left
Right
100%
100%
Mono Tremolo
Left
Right
100%
50%
Stereo Tremolo 90¡
Left
Right
100%
0%
Stereo Tremolo 180¡
If the
TREM/CHORUS ON/OFF
parameter is turned off, the Tremolo effect will not
be heard (see page 35). If you adjust any of the Tremolo parameters, the display
will flash
will flash
OFF twice to indicate it is turned off.
The Tremolo parameters are disabled when the Rotary type of Chorus is selected.
If you attempt to modify the Tremolo parameters, the display will temporarily
read
If you attempt to modify the Tremolo parameters, the display will temporarily
read
---.
2
Some guitar amps mistakenly call this ÒvibratoÓ, but this is incorrect. Vibrato is actually
the fluctuation of pitch, whereas tremolo is a fluctuation of volume.