Справочник Пользователя для Konica Minolta cf2002 cf3102 um 7.1.0
8
Troubleshooting
8-18
CF2002/CF3102
6
Insert the staple holder until it locks
into place.
into place.
7
Slide the finisher back against the
copier.
copier.
H
If stapling still cannot be
performed, even after
performing the above
procedure, contact your
technical representative.
performed, even after
performing the above
procedure, contact your
technical representative.
To clear jammed staples in FN-8
CAUTION
Stapler unit may be damaged
§
Do not pull out the paper in any other way than described below.
1
Slide the finisher away from the
copier.
copier.
2
Open the cover of the horizontal
transport unit.
transport unit.
3
Remove any paper, and then close
the cover of the horizontal transport
unit.
the cover of the horizontal transport
unit.
CF2002.book Page 18 Friday, June 13, 2003 9:29 AM