Справочник Пользователя для interactive-health ijoy130

Скачать
Страница из 8
Important Assembly Instructions and Operation
Place the head pillow foam insert
against the pillow zipper.
8
9
Getting the most from your iJoy-130
Safety Precautions while 
using your Massage Chair
• 
Comfortable clothing is recommended while using your
massage chair.
• 
Your massage chair was meant to be used in a relaxed
position. While sitting in the chair, never force any body
part into the backrest area while the rollers are moving.
• 
Do not allow children to use the massage chair.
• 
If you feel any abnormal discomfort during the operation of
your massage chair, turn off the power immediately and do
not use the chair. Consult your physician.
• 
Do not sit on the controller.
• 
Do not pull on the AC cord.
• 
Always confirm that there are no obstacles behind the chair
and that there is sufficient space to recline.
• 
When using your massage chair after it has been in
storage, check to see that the chair is operating properly
prior to sitting in the chair.
• Do not attempt to repair your massage chair yourself.
If a malfunction occurs, please contact
Interactive Health  at (800) 742-5493.
Your iJoy-130 massage chair is a quality piece of 
furniture, and can be utilized and cared for like 
the rest of the furniture in your home.
The HTT robotic massage
®
system inside your chair  is a
sophisticated electro-mechanical device that requires
some special care and safety precautions.
Please follow these basic guidelines carefully. They are
provided to ensure the maximum enjoyment of your chair.
Massage Softening Pad
This pad can be used to soften the intensity
of the massage.
To Install:
1. On the front side of the backrest there is a zipper.
Unzip this and you will find a pocket.
2. Insert the softening pad into this pocket and close 
the zipper.
You will find the massage to be less intense when the
softening pad is installed. You can adjust the intensity 
by adding or removing the softening pad. Addtional
softening pads are available for an additional charge
from Interactive Health.
Pull the head pillow over the foam insert.
Place the lumbar pillow at the base of
the backrest as shown.
Plug the chair into a grounded power
source and turn master switch to ON.
Note the location of the Child Safety Lock.
2
Attach the head pillow using the
matching zipper halves.
1
3
Attach it to the headrest using the hook
and loop strip.
4
6
For a more intense massage, if desired,
unzip the outer panel on the backrest
and REMOVE the massage softening pad.
Close the zipper on the backrest.
5
7
While sitting in the chair, Raise or Lower the
Backrest to suit your comfort by pulling the
Backrest lever and leaning back or forward.
To begin the massage, use the remote
controller on the left armrest (See page
10 for details).
8
9