Справочник Пользователя для Terratec correctly installing pci cards

 

 
Only when the card appears here without any question or 
exclamation marks is it fully functional. In case the card should 
display errors here the software installation should be checked. 
Should the card not appear in the Device Manger, check if there 
is a menu listing called „Unknown Device“ or „Other Component“ 
directly under the computer name at the top of the list. If the sub-
menu listing here is labelled „Audio controller for Multimedia“ (by 
soundcards),then the driver is not properly installed. Here one 
should carry out the installation routine again by right-clicking on 
the device and selecting to reinstall the driver. 
 
b.  Is the card included in the PCI Device Listing menu? 
If the card is not displayed in the Device Manager, the PCI 
Device Listing should be controlled. This is displayed by the PC 
BIOS directly, and very briefly, after the POST (Power On Self Test 
i.e. RAM test, HDD detection, etc...) and can be paused on 
screen by using the pause button. The right moment is quite 
difficult to hit, as it is usually less than one second long. Here, 
manufacturer and configuration information is displayed for all 
installed devices. Should a Multimedia Controller be listed here, 
make note of the manufacturer and device ID as well as the IRQ 
number reported and contact the technical support department. 
 
Should the card not appear in this list then the physical mounting 
should be checked. If no error is found here (i.e. card fell out, 
crooked, etc...) 
the technical support should be contacted as well. 
 

 
And that successfully concludes the TerraTec card installation, after 
which you may begin exploring the many functions and Easter eggs :). 
Furthermore, we invite you visit our website at www.terratec.com where 
you can find further information about your hardware. 
 
Enjoy!