Справочник Пользователя для jetway nf18gfr3a

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

ACPI Function 
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management 
(ACPI).  The settings are Enabled and Disabled. 
Video Off Method 
This determines the manner in which the monitor is blanked. 

DPMS (default) 

Initial display power management signaling. 

Blank Screen 

This option only writes blanks to the video buffer. 

V/H SYNC+Blank  This selection will cause the system to turn off the vertical and 

horizontal synchronization ports and write blanks to the video buffer. 

Power Button Function 
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state.  
The settings are: Delay 4 Sec, Instant-Off. 
Wake Up On Ring/PME/LAN 
During Disabled, the system will ignore any incoming call from the modem/LAN. During 
Enabled, the system will boot up if there’s an incoming call from the modem. 
Wake Up on RTC Alarm 
This function is for setting date and time for your computer to boot up.  During Disabled, you 
cannot use this function.  During Enabled, choose the Date and Time Alarm: 
Time(dd:hh:mm)  of Alarm   
You can choose which day of month , what hour, minute the system will boot up. 

Note:  If you have change the setting, you must let the system boot up until it goes to the 

operating system, before this function will work. 

This section describes configuring the PCI bus system. PCI, or Personal  Computer 
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed 
the CPU itself uses when communicating with its own special components. This section 
covers some very technical items and it is strongly recommended that only experienced 
users should make any changes to the default settings.