Справочник Пользователя для jetway nf18gfr3a

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.

Miscellaneous Control

Item Help

** Current Host Clock is

Host Clock at Next Boot is 100MHz

** Current DRAM Clock is

DRAM Clock at next Boot is 133MHz

CPU Vcore Select Default

CPU Ratio Select Default

Core_VDD Select 1.7V(Default)

VDD_AUXC Select 1.6V(Default)

VAGP Output 1.5V(Default)

VRAM Output 2.6V(Default)

VAUX Output Default

VAGP LUV Protect Enabled

VRAM LUV Protect Enabled

Dual3.3V LUV Protect Disabled

Flash Parts Write Protect Enabled

Menu Level >

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Host Clock at next Boot is
This item allows you to select CPU frequency by BIOS setting
The choice are: 100/133/166/200/236/240/242/244/245/250 MHz
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100/110/125/133/138/166/200/208/221/229 MHz
CPU Vcore Select
This item allows you to select Vcore of the CPU. The choice are: +1.100V∼+1.850V.
CPU Ratio Select
This item allows you to select Ratio of the CPU. The choice are:X5~X24
VDD AUXC Select
This item allows you to select Chip Voltage. The choice are 1.6V(Default), 1.7V
VAGP Output
This item allows you to select 1.5V of the AGP 4X VGA card. The choice are: 1.5V, 1.6V,1.7V,
1.8V
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V~ 3.0V.
VAUX Output
This item allows you to select AUX voltage. The choice are: Default, 2%, 4%, 8%,12%, 16%.

VAGP/VRAM LUV Protect
This item allows you enabled the protect function on motherboard when over current. The choice are:
Enabled(Default), Disabled

Flash Part Write Protect