Справочник Пользователя для jetway 848pdcr2a

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

(4)  Speaker connector: SPEAK  
 

This 4-pin connector connects to the case-mounted speaker. See the figure below. 

This connector connects to the hard disk activity indicator light on the case.  

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer 
without having to turn off your power switch.  This is a preferred method of rebooting in 
order to prolong the lift of the system’s power supply.  See the figure below. 

The Power LED is light on while the system power is on.  Connect the Power LED 
from the system case to this pin.  

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the 
system.

 

 

   

 

 

 
(9)  Wake On-LAN Headers (3-pin) :  WOL 

This connector connects to a LAN card with a WAKE ON-LAN output.  This 
connector power up the system when a wake up signal is received through the LAN 
card. 

NOTE:  This feature requires that Wake On LAN or Ring In Wake up is enabled.