Справочник Пользователя для jetway 848pdcr2a

following message will be displayed on the screen: “EPP Mode Select.” At this time either
EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.

Power Management Setup

Item Help

ACPI Function Enabled

Power Management User Define

Video off Method V/H SYNC+Blank

Video Off In Suspend Yes

Suspend Type Stop Grant

MODEM Use IRQ 3

Suspend Mode Disabled

HDD Power Down Disabled

Soft-off by PWR-BTTN Instant-off

Wake-Up by PCI card Disabled

Power On by Ring Disabled

Resume by Alarm Disabled

X Date (of Month) 0

X Time (hh:mm:ss) 0 : 0 :0

CPU Thermal Management Timer 32 Min

> PM Timer Reload Events Press Enter

Menu Level >

↑↓→←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off in Suspend
This determines the manner in which the monitor is blanked. The choice are Yes → Video
will off , and No→ Video always On.
Video Off Method
This determines the manner in which the monitor is blanked.

DPMS (default)

Initial display power management signaling.

Blank Screen

This option only writes blanks to the video buffer.

V/H SYNC+Blank This selection will cause the system to turn off the vertical and

horizontal synchronization ports and write blanks to the video
buffer.

Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.