Справочник Пользователя для jetway s755maxr1a

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

Supervisor password:   Can enter and change the options of the setup menus. 
User password: 

Can only enter but do not have the right to change the options of the 
setup menus.  When you select this function, the following message 
will appear at the center of the screen to assist you in creating a 
password. 

Type the password, up to eight characters in length, and press <Enter>.  The password typed 
now will clear any previously entered password from CMOS memory.  You will be asked to 
confirm the password.  Type the password again and press <Enter>.  You may also press 
<Esc> to abort the selection and not enter a password.   

To disable a password, just press <Enter> when you are prompted to enter the password.  A 
message will confirm that the password will be disabled.  Once the password is disabled, the 
system will boot and you can enter Setup freely. 

When a password has been enabled, you will be prompted to enter it every time you try to 
enter Setup.  This prevents an unauthorized person from changing any part of your system 
configuration.  

Additionally, when a password is enabled, you can also require the BIOS to request a 
password every time your system is rebooted.  This would prevent unauthorized use of your 
computer. 

You determine when the password is required within the BIOS Features Setup Menu and its 
Security option.  If the Security option is set to “System”, the password will be required both 
at boot and at entry to Setup.  If set to “Setup”, prompting only occurs when trying to enter 
Setup.