Справочник Пользователя для silent-knight regency 4720c-commercial
Section 3. Using Your Model 4720 Security System
User's Manual
Page 19
Changing Your Access Code
Access codes are 3 to 6 digits in length. You must be sure that codes do not
conflict. For example, assigning a code as 543 would prevent another code
previously assigned as 5432 from working.
conflict. For example, assigning a code as 543 would prevent another code
previously assigned as 5432 from working.
After entering a new access code, always remember to press the
TEST
button. You can record new access code numbers on page 29.
Note: When changing codes, make sure that no code starts with the duress
trigger digits (see page 12).
1. Display the code you wish to change (Steps 1-6 in Displaying Codes).
2. To change the access code displayed, press
CLR
.
3. Enter the new access code you have assigned (3 to 6 digits).
4. Store the new code in memory by pressing
TEST
.
The display will then show the next access code in sequence. Repeat Steps
1-3 for each additional code you wish to change.
1-3 for each additional code you wish to change.
Deleting Codes
Note: Do NOT delete your main access code.
1. Display the code you wish to delete (Steps 1-6 in Displaying Codes).
2. Press
CLR t
o clear a code from memory without assigning a new code
.
3. Press
TEST
.
Exiting Programming Mode
To return to normal operation, press
MUTE
MUTE
.