Справочник Пользователя для iskratel si2000 callisto821 router
SI2000 Callisto821+ Router Users Guide
12/107
Obtain an IP automatically
If you enable DHCP server in Callisto821+, is the easiest way to set up a connection to configure the LAN
adapter on your system to obtain an IP automatically. This can be done in your operational system by
managing the Local Area Connection Properties. The TCP/IP protocol must be installed on your system and
set to obtain an IP address automatically. Example is shown on the figure 7.
adapter on your system to obtain an IP automatically. This can be done in your operational system by
managing the Local Area Connection Properties. The TCP/IP protocol must be installed on your system and
set to obtain an IP address automatically. Example is shown on the figure 7.
2.2.2
Telnet management connection
This section of the document describes the basic principles on how to manage the basic settings of the
SI2000 Callisto821+ Router using the Telnet client terminal connection. In order to set up the Telnet Client
connection, the router and the computer must reside in the same IP network (e.g. 192.168.1.0).
To establish a Telnet connection do the following:
SI2000 Callisto821+ Router using the Telnet client terminal connection. In order to set up the Telnet Client
connection, the router and the computer must reside in the same IP network (e.g. 192.168.1.0).
To establish a Telnet connection do the following:
1. Open the Command Prompt.
2. Type in the command for accessing certain IP address over Telnet Client connection:
2. Type in the command for accessing certain IP address over Telnet Client connection:
telnet <ipaddress>
e.g. telnet 192.168.1.1 for default settings of the SI2000 Callisto821+ Router.
e.g. telnet 192.168.1.1 for default settings of the SI2000 Callisto821+ Router.
3. The initial screen of Command Line Interface (CLI) will appear:
Figure 7: IP obtain automatically set up for Local Area connection on computer