Справочник Пользователя для iskratel si2000 callisto821 router

SI2000 Callisto821+ Router Users Guide 

 78/107 

 
VPI: ATM VPI (Virtual Path Identifier) is a number representing ATM path. You should get this number from 
you Service provider. 
VCI:  ATM VCI (Virtual Channel Identifier) is a number representing ATM channel. You should get this 
number from you Service provider. If you do not know these numbers your connection will not work. 
WAN IP address: Enter the IP address your service provider has assigned you here. If you do not have such 
address leave it as 0.0.0.0. Callisto821+ will get it automatically. 
Enable NAT on this interface: If your service provider gives you only one IP address select this option in 
order to allow more than one computer connecting to the Intenet. 
LLC header mode: Enable or disable LLC header mode. 
HDLC header mode: Enable or disable HDLC header mode. 
Authentication: Select the type of authentication you service provider supports. Available choices are No 
Authentication, PAP and CHAP. When using PAP or CHAP do not forget to enter valid username and 
password. 
User name: Type in the username to access the Internet. 
Password: Type in the password to access the Internet. 
 
Press Configure button to create new connection. 
 
The parameters you can change for PPPoA connection are similar to PPPoE connection's parameters. 

IP over ATM is even less complex protocol than any others. You can easily connect two devices because 
this protocol is not master/slave oriented.  
 
When creating new WAN Connection select IPoA routed: 
 
 
You need to enter only very basic parameters for IPoA connection.