Справочник Пользователя для MINOURA rs-1200

!

RS-1200 instructions manual

Thank you for purchasing the Minoura RS-1200 bicycle repair stand.

The RS-1200 is a stand for basic bike maintenance and repair work.  It supports your bike at a height that allows

easy access.  The bike is supported at 3 positions; the bottom bracket shell, the down-tube and the seat-tube.

The angle of the down-tube support arm and the seat-tube support hook position are adjustable to insure a perfect

fit to your frame.  The frame is also foldable for easy storage when it is not in use.

Please read this instructions carefully before use.

Install the step-bar tubes to the frame and the leg. (see Fig. A)

(Fig. A)

Install the down-tube support arm to the main frame,  then screw

the knob bolt to the hole on the arm bracket.

Open the seat-tube stay and insert the seat-tube support hook

and plug in the end-cap.

1197-1 Godo, Anpachi, Gifu 503-2305 JAPAN

Phone: +81-584-27-3131 / Fax: +81-584-27-7505

1996 East Avenue, Hayward, CA 94541 U.S.A.

Email: minoura@minoura.jp / http://www.minoura.jp

Fax: 1-510-538-5899 / Email: MinHelp@ATTglobal.net

Place the BB shell onto the BB support,

lean the bike backward until the seat-tube

touches the hook, then adjust the down-

tube support arm angle by turning the knob

bolt.

(Fig. B)

Use RS-1200 ONLY on a flat and stable

floor in order to prevent accidents.

T I P S

T I P S

T I P S

T I P S

T I P S

Open the seat-tube support arm fully and

set the left side crank arm towards the front

wheel..