Справочник Пользователя для MINOURA ds-110 ds-100h

!

!

!

How To Use DS-110H

Layout Example

For More Information

!

1

2

1

2

Loosen the M6 bolt on the frame to allow the connection

bar to slide through the frame.  Remove one end cap from

the connection bar with taking care the slot nut is not

removed, then insert the bar through the frame.

Replace the end cap on the connection bar and fully

tighten the bolt using

a M5 hex wrench.

How To Use DS-110

When using a single DS-110,

the connection bar should be

fixed in the center.

If more than one DS-110 stands are to be

connected, the connection bar should be

fixed at the end of the bar.

<To Close>

< To Open>

3

To stand a bicycle in the DS-110, simply insert the wheel

into the frame.

<Combination of DS-110 and DS-110H>

(Place the bike on the lower stand first.)

Please note that the minimum compatible

wheel size is 20".

Please ensure the wheel is securely inserted

into the frame and is supported by the spokes.

If using wheels with unique spokes or design

please ensure that the wheel is fully sup-

ported.

The DS-110H is a high postion

mount for increasing the

height of the stand when used

either on it's own or connected

to several other stands.

<DS-110H>

Remove both M6 bolts from

the frame with taking care

the slot nuts are not re-

moved, then slide the DS-

110 into the DS-110H from

the side.

Fully tighten both bolts us-

ing an M5 hex wrench.

Please ensure the connec-

tion bar is fitted to the DS-

110, not the DS-110H.

<Completed DS-100 & 110H>

minoura@minoura.jp

MinouraUSA@ATTglobal.net

http://www.minoura.jp

Made In Japan

<Angled Layout>

<Horizontal Layout>

(using DS-110H alternately)

One side frame can be adjusted to accommodate to your

tire width.  Loosen both M6 bolts, adjsut the frame posi-

tion, then tighten both bolts firmly.

Do not use the

DS-110 and DS-

110H on their

own without the

connection bar

as it will not be

stable enough to

support the

bicycle.