Справочник Пользователя для BaByliss 8430

Скачать
Страница из 18
3
the  surface  of  the  mirror  when  left 
unattended, as this may cause a fire.
Let the appliance cool down to room 
temperature before storing. Store the 
appliance in a cool and dry area, out 
of children’s reach.
BULB REPLACEMENT
Important:  always  turn  switch  to  off 
position (0), allow to cool and unplug 
before replacing light bulbs.
This  BaByliss  mirror  uses  two 
3.6V-0.5A  bulbs.  Do  not  use  bulbs 
greater than 3.6V.
1.  Turn  the  back  of  the  appliance  to 
the  left  to  open,  then  lift  off  the 
back of the housing.
2.  Unscrew the old bulbs and replace 
with the new bulbs.
3.  Carefully replace the back housing 
and turn it to the right.
BATTERY REPLACEMENT
This mirror uses 3 AA batteries.
To  insert  batteries,  turn  the  back  of 
the appliance to the left to open, then 
lift off the back of the housing. Insert 
3  AA  alkaline  batteries,  direction  as 
indicated  on  battery  compartment 
(Alkaline batteries will ensure the best 
perfomance and longest life for your 
appliance).  If  you  are  not  going  to 
use the unit for a long period of time, 
or if the battery is dead, remove the 
battery from the unit. After inserting 
batteries, close battery compartment 
and turn unit to I position.
CHROME MIRROR
This  lighted  mirror  with  triple 
magnification is very elegant and will 
make  it  easy  for  you  to  apply  your 
make-up.  It  has  an  attractive  design 
to suit most interiors. 
The  halo-lighting  around  the  mirror 
is soft and even, perfect for applying 
make-up.
The mirror will swivel so that you can 
adjust it to any angle. It works with a 
transformer (supplied) or cordless on 
3 AA batteries (not supplied).
INSTRUCTIONS FOR USE
•  Set the frame to the desired angle.
•  Connect  the  cord  to  the  appliance 
(at the back of the mirror), then plug 
in,  or  place  batteries  in  the  battery 
compartment.
•  Press the switch button to «I» to turn 
lighting on.
•  After  use,  always  switch  off  the 
appliance.
MAINTENANCE
The lighted mirror is designed mainly 
for  home  use  and  requires  little 
maintenance.  If  cleaning  becomes 
necessary, unplug the electrical cord 
and wipe the outside of the appliance 
with  a  damp  cloth.  Clean  the  mirror 
with a glass cleaner. Do not switch the 
mirror on until it is completely dry.
STORAGE
Always  unplug  the  appliance  after 
use.
Be sure direct sunlight will not strike 
ENGLISH