Справочник Пользователя для MINOURA vergo
VERGO instruction manual
Thank you for purchasing
the “VERGO” bike mount kit.
You can hold two
or three bikes in the cargo space of your vehicle or on the truck bed easily and
with stability.
Please read the following instructions carefully before use.
Please read the following instructions carefully before use.
HOW TO USE VERGO
<Mounting Example>
Two bikes in a mini-van
1.
Place VERGO on
a flat floor of the cargo space.
VERGO itself
is free standing so uneven
floor design will
compromise stability.
2.
Remove the front wheel, then clamp the front
fork on the Fork Mount with
fork on the Fork Mount with
the supplied
quick release skewer.
When you
need to adjust the bikes position, just
slide the Fork Mount
by loosening the knob
bolt
and moving the mount in either direction.
Slide to
the desired position, then tighten the knob
bolt firmly to fix the position.
Make sure both adjustment position guides are
properly in the rail of the main frame.
Make sure both adjustment position guides are
properly in the rail of the main frame.
3.
4.
The Fork Mount can be twisted in 25 degrees in
both
both
directions. This makes for easy adjustment
for handlebar issues and saves space.
Understand: Bikes on VERGO are not attached to. If you drive hard, the bikes may move around
in your vehicle. To keep the bikes stable, we recommend tying bikes down with a long strap.
in your vehicle. To keep the bikes stable, we recommend tying bikes down with a long strap.
Twisted Fork Mount position
CAUTION