Справочник Пользователя для Kofax vrs4
Quick Tour
VRS User’s Manual
29
Figure 2-24. New Profile Dialog Box
4
The saved profile will be available from the VRS taskbar menu, the Profiles
menu in the VRS Interactive Viewer, or the profile selection list on the VRS
Interactive Viewer toolbar.
Setting the QC Mode
By default, the VRS Interactive Viewer is set to open when errors occur. You can use
the QC Modes menu to select other intervals for opening the VRS Interactive Viewer
for image quality inspection and interactive updates. The currently active QC mode is
indicated by a check mark. Once selected, a QC mode setting stays in effect until it is
changed, even across scanning sessions. Also, the QC mode setting is unique to each
VRS user on the computer.
X To select a QC mode
1
Right-click the VRS taskbar icon and select “QC Modes” from the menu.
2
From the QC Modes submenu, select one of the following modes to specify
when the VRS Interactive Viewer will open and how hardware errors will be
handled:
• On Errors: opens only when exception conditions occur.
• On Errors: opens only when exception conditions occur.
• First Page: opens when you scan the first page of a batch.
• Every Page: opens after each document scans or after each side of a duplex
document scans.
• QC Later: opens when VRS is invoked from the Ascent Capture 7.0
Quality Control module. QC Later mode is available only when VRS is
installed with Ascent Capture 7.0. For more information, refer to the
Ascent Capture online help or the Getting Started with Ascent Capture
guide.
• Disabled: does not open, even if exception conditions occur.
• Hardware Warnings: causes VRS to handle errors according to the Action
selection on the Errors tab in the VRS Administration Utility. When this
option is not selected, it is the equivalent of selecting “Return Error” for all
hardware error conditions.