Справочник Пользователя для mulholland walkabout 1&2
21
along the hex
cross bar (12) to
the desired
width. Tighten
the set screw.
Repeat on
opposite side.
cross bar (12) to
the desired
width. Tighten
the set screw.
Repeat on
opposite side.
3. Depth: Loosen
the bar clamp
(10) by
loosening the
allen screw (6)
on the top. Loosen the lock pin block (7) by loosening
the allen screw (8) on the side. Slide the shoulder pad
back/forth to the depth which provides the appropriate
amount of anterior support. Align the lock pin block (7),
with the plunger pin (which is in side the lock pin block)
on top so the shoulder pad will lock in position when in
use and when pivoted out of the way. Tighten the allen
screw (8) to secure the lock pin block (7). Slide the bar
clamp (10) against the pivot pin receiver (10) to provide
enough tension to lock the pivot. Tighten the allen screw
(6) to tighten the bar clamp (10). Repeat for both sides.
(10) by
loosening the
allen screw (6)
on the top. Loosen the lock pin block (7) by loosening
the allen screw (8) on the side. Slide the shoulder pad
back/forth to the depth which provides the appropriate
amount of anterior support. Align the lock pin block (7),
with the plunger pin (which is in side the lock pin block)
on top so the shoulder pad will lock in position when in
use and when pivoted out of the way. Tighten the allen
screw (8) to secure the lock pin block (7). Slide the bar
clamp (10) against the pivot pin receiver (10) to provide
enough tension to lock the pivot. Tighten the allen screw
(6) to tighten the bar clamp (10). Repeat for both sides.
4. Pivoting the shoulder pads: The shoulder pads can be
released and pivoted out of the way while placing the
child in or removing the child from the stander. Pull the
ring (13) on the back of the plunger pin to release the
pivot. To open, rotate the shoulder pad away from the
column until the pivot locks. Repeat for both sides. To
replace, pull the ring and rotate the shoulder pad in the
opposite direction until the pivot locks.
child in or removing the child from the stander. Pull the
ring (13) on the back of the plunger pin to release the
pivot. To open, rotate the shoulder pad away from the
column until the pivot locks. Repeat for both sides. To
replace, pull the ring and rotate the shoulder pad in the
opposite direction until the pivot locks.
Figure 26
7 10
5
3
8
11
6
12
13