Справочник Пользователя для opcode studio 4

Choose this command to display the ver-
sion numbers of your Studio 4 ROM. You 
should know your ROM version if you call 
Opcode Technical Support about your 
Studio 4.

Any time the current Studio Setup docu-
ment contains more than one Studio 4, 
you’ll see a listing of them at the bottom of 
the Studio 4 menu.

To select (check) a Studio 4, simply pull 
down the menu and release the mouse 
over the desired Studio 4.

The SMPTE Reader and Stripe SMPTE 
windows work with the selected Studio 4. 
You must select a Studio 4 before opening 
either the SMPTE Reader or Stripe 
SMPTE windows. The SMPTE Reader 
window is discussed in Chapter 9. The 
Stripe SMPTE window is discussed in 
Chapter 10.

Choose any Studio 4 on a modem port to 
open either a Network Routing window or 
a Routing, Channelizing and Muting 
window for the modem port. Similarly, 
choose any Studio 4 on a printer port to 
open either a Network Routing window or 
a Routing, Channelizing and Muting 
window for the printer port. The Network 
Routing window is discussed in 
Chapter 6. The Routing, Channelizing and 
Muting window is discussed in Chapter 7.

If you network a MIDI Time Piece with a 
Studio 4, the MTP appears as a Studio 4 in 
the Studio Setup document and is labeled 
“MTP as S4”. Everything in the Studio 4 
menu works with the networked MTP 
except Stripe SMPTE, Jam Sync and 
Display ROM Version. You can open 
the SMPTE Reader window for a MIDI 
Time Piece that's networked to a Studio 4 
and it’ll work except you can't change the 
MIDI synchronization format.