Справочник Пользователя для sentrol zxlcd
25
CLEAR
1
5.
Press
repeatedly to view any zones that have not been
tested. If you opened a sensor and the Control Station indicates that
it was not tested, it may be faulty. Retest the sensor or contact your
Security Company Representative.
it was not tested, it may be faulty. Retest the sensor or contact your
Security Company Representative.
6.
Press
to quit.
Battery Test
The battery test is used by the Security Company Representative to test
the battery after a new battery has been installed. Your battery is
automatically tested periodically.
the battery after a new battery has been installed. Your battery is
automatically tested periodically.
To perform a battery test:
1.
Press
. The Control Station will display:
2.
Enter passcode:
The Control Station will display:
3.
Press
.
If no trouble condition occurs, the Control Station will sound an
audible tone and return to the ready status. If a low/no battery
trouble condition occurs, the Control Station will display:
audible tone and return to the ready status. If a low/no battery
trouble condition occurs, the Control Station will display:
Contact your Security Company Representative when this condi-
tion occurs.
tion occurs.
FOR TESTS
ENTER PASSCODE
ENTER PASSCODE
2
8
ENTER 1-6 TO
SELECT A TEST
SELECT A TEST
TESTING YOUR SYSTEM
LOW/NO BATTERY
OFF TO SILENCE
OFF TO SILENCE