Справочник Пользователя для sentrol zxlcd
31
3.
Press
. The Control Station will display:
4.
Enter the User ID Passcode
(1 - 9) that you wish to
program/change.
5.
Press
.
The Control Station will display the first digit of the
selected User ID passcode. As each new number is
selected, the Control Station will display the next digit
that may be accepted or changed.
selected User ID passcode. As each new number is
selected, the Control Station will display the next digit
that may be accepted or changed.
6.
Enter new four-digit passcode
Repeat above steps for each passcode to be programmed or press
to return to the Ready mode.
to return to the Ready mode.
If the new passcode being entered is a duplicate of an existing one, the
Control Station will sound an error tone and return to the first digit
location so you may try again.
Control Station will sound an error tone and return to the first digit
location so you may try again.
To view an existing passcode, press
after each digit displayed
until all four digits have been displayed.
If you wish to make a User ID passcode inoperable,
enter as the new four-digit passcode.
ENTER
CLEAR
USER 00
SELECT USER ID
SELECT USER ID
NOTE
ENTER
0
0
0
0
ZX200/ZX210 PROGRAMMING
2