Справочник Пользователя для kvh 01027702bk install

1.

Position the roof rack crossbars 35" apart,
measured center-to-center. Ensure that the
crossbars are securely fastened to the vehicle.

2.

Unlock and remove the end caps from both ends
of the crossbars.

3.

Remove the four tie-down anchors from the roof
rack. Save the anchors for future use.

4.

Remove the long rubber strips that run along the
top of the crossbars. Be sure to save these strips
for future use.

5.

At each crossbar, insert two T-nuts into the center
channel and slide the nuts along the channel.

6.

Reinstall the end caps that you removed in Step 2. 

54-0350

TracVision A7 Installation Guide

Be sure the roof rack’s crossbars are
seated in the rack’s detents and are locked
in place.

Center Channel

T-nut