Справочник Пользователя для mulholland movita adult
Manufacturer: elmi GmbH - Handwerkerzone 25 - I-39052 Kaltern - Tel 0471 961002 - FAX 0471 962374
elmisrl@tin.it - www.movita.it
elmisrl@tin.it - www.movita.it
Movita adult medium - adult large
User manual
These operating instructions contain information, settings, safety precautions, which are to be considered with the
use of Movita adult medium and adult large, as well as other important data. Movita adult medium and adult large
are not to be used on diagonal and uneven ground.
use of Movita adult medium and adult large, as well as other important data. Movita adult medium and adult large
are not to be used on diagonal and uneven ground.
Movita adult medium and adult large are walking aids for children starting with age 7 and for adult body size from
approx. 120 cm to 200 cm.
Movita is directed mainly towards walk-obstructed people who, without support, cannot keep themselves upright.
approx. 120 cm to 200 cm.
Movita is directed mainly towards walk-obstructed people who, without support, cannot keep themselves upright.
Movita can be adapted individually to the needs of the user. The thoracic support holds the upper body in an
upright position and gives the user security. The pelvic support holds the child on the seat, and the handle gives a
relieved support for the arms. The thoracic support and the pelvic support can be opened with a simple motion,
thus makes the transfer particularly easy. Movita adult medium and adult large can be used indoors and outdoors,
thanks to the large wheels.
upright position and gives the user security. The pelvic support holds the child on the seat, and the handle gives a
relieved support for the arms. The thoracic support and the pelvic support can be opened with a simple motion,
thus makes the transfer particularly easy. Movita adult medium and adult large can be used indoors and outdoors,
thanks to the large wheels.
Start-up
Movita adult medium and adult large will be delivered in two parts: the underframe with wheels and brakes and the
upper section with seat and thoracic support. Under the seat a hexagonal wrench is located (fig. 2).
upper section with seat and thoracic support. Under the seat a hexagonal wrench is located (fig. 2).
Assembling upper section and underframe
Upper section needs to be put on top of the underframe.
Upper section needs to be put on top of the underframe.
Basic model adjustment
Height of the thoracic support and seat
For height adjustment of the thoracic support, loosen the two bottom handles (fig. 3). Once the desired height has
been reached, the handles need to be tightened whereby the same height can be adjusted on both sides with the
help of the height framework.
For height adjustment of the thoracic support, loosen the two bottom handles (fig. 3). Once the desired height has
been reached, the handles need to be tightened whereby the same height can be adjusted on both sides with the
help of the height framework.
The seat height can be adjusted by loosening both upper handles (fig. 4). Once the desired height has been
achieved both handles need to be tightened, whereby with the help of the height framework the exact height can
be adjusted.
achieved both handles need to be tightened, whereby with the help of the height framework the exact height can
be adjusted.
Thoracic support
The thoracic support can be opened or closed through lightly raising or down-pressing the padded pipe (fig. 6).
The thoracic support can be opened or closed through lightly raising or down-pressing the padded pipe (fig. 6).
Springs
The two springs in the lower pipes can be exchanged, if a harder or softer suspension is needed (fig. 5). The
springs are available in four different levels of stiffness, which are appropriate for the following body weights 20 kg
- 40 kg -80 kg -100 kg.
The two springs in the lower pipes can be exchanged, if a harder or softer suspension is needed (fig. 5). The
springs are available in four different levels of stiffness, which are appropriate for the following body weights 20 kg
- 40 kg -80 kg -100 kg.
Seat
The seat can be pushed back and forward. Loosen the large screw under the seat attachment pipe (fig. 6). If the
desired position is found the screw needs again to be tightened. In addition also the angle of the seat can be
adjusted again by loosening the two internal hexagonal screws under the seat (fig. 6). After adjusting, the screws
are tightened again.
The seat can be pushed back and forward. Loosen the large screw under the seat attachment pipe (fig. 6). If the
desired position is found the screw needs again to be tightened. In addition also the angle of the seat can be
adjusted again by loosening the two internal hexagonal screws under the seat (fig. 6). After adjusting, the screws
are tightened again.