Справочник Пользователя для Carvin mts3200
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INSTRUCTIONS (EUROPEAN)
The conductors in the AC power cord are colored in accordance with the following code.
GREEN & YELLOW—Earth BLUE—Neutral BROWN—Live
U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is
unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAM-
AGED OR CUT MAIN PLUG INTO A POWER SOCKET.
unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAM-
AGED OR CUT MAIN PLUG INTO A POWER SOCKET.
IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polariza-
tion means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the appliance.
SERVICING: The user should not attempt to service the appliance beyond that described in the oper-
ating instructions. All other servicing should be referred to qualified service personnel.
FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer
to replacement text on the unit for correct fuse type.
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polariza-
tion means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the appliance.
SERVICING: The user should not attempt to service the appliance beyond that described in the oper-
ating instructions. All other servicing should be referred to qualified service personnel.
FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer
to replacement text on the unit for correct fuse type.
REFER SERVICING TO QUALIFIED SER-
VICE PERSONNEL! THIS UNIT CON-
TAINS HIGH VOLTAGE INSIDE!
VICE PERSONNEL! THIS UNIT CON-
TAINS HIGH VOLTAGE INSIDE!
CAUTION
RISK OF ELECTRIC SHOCK
Ref. No.
Carvin P/N
B1
Jumper, 0.35”, 0
Ω
50-00035
B2
Jumper, 0.50”, 0
Ω
51-00050
B3
Jumper, 0.35”, 0
Ω
50-00035
B4
Jumper, 0.35”, 0
Ω
50-00035
B5
Jumper, 0.35”, 0
Ω
50-00035
B6
Jumper, 0.50”, 0
Ω
51-00050
B7
Jumper, 0.50”, 0
Ω
51-00050
B8
Jumper, 0.50”, 0
Ω
51-00050
B9
Jumper, 0.8”, 0
Ω
44-18000
B10
Jumper, 0.35”, 0
Ω
50-00035
B11
Jumper, 0.8”, 0
Ω
44-18000
B12
Jumper, 0.35”, 0
Ω
50-00035
B13
Jumper, 0.35”, 0
Ω
50-00035
B14
Jumper, 0.35”, 0
Ω
50-00035
B15
Jumper, 0.50”, 0
Ω
51-00050
B16
Jumper, 0.8”, 0
Ω
44-18000
B17
Jumper, 0.50”, 0
Ω
51-00050
B18
Jumper, 0.35”, 0
Ω
50-00035
B19
Jumper, 0.8”, 0
Ω
44-18000
B20
Jumper, 0.35”, 0
Ω
50-00035
B21
Jumper, 0.8”, 0
Ω
44-18000
B22
Jumper, 0.50”, 0
Ω
51-00050
B23
Jumper, 0.8”, 0
Ω
44-18000
B24
Jumper, 0.50”, 0
Ω
51-00050
B25
Jumper, 0.50”, 0
Ω
51-00050
B26
Jumper, 0.8”, 0
Ω
44-18000
B27
Jumper, 0.35”, 0
Ω
50-00035
B28
Jumper, 0.35”, 0
Ω
50-00035
B29
Jumper, 0.35”, 0
Ω
50-00035
B30
Jumper, 0.35”, 0
Ω
50-00035
B31
Jumper, 0.35”, 0
Ω
50-00035
B32
Jumper, 0.35”, 0
Ω
50-00035
B33
Jumper, 0.35”, 0
Ω
50-00035
B50
Jumper, 0.50”, 0
Ω
51-00050
B51
Jumper, 0.35”, 0
Ω
50-00035
B52
Jumper, 0.50”, 0
Ω
51-00050
C1
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C2
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C3
Capacitor, Poly, 0.001µF 100V, 10%
46-10212
C4
Capacitor, Poly, 0.033µF 100V, 10%
46-33312
C5
Capacitor, Ceramic, 120PF 500V, 10%
45-12152
C6
Capacitor, Poly, 0.01µF 100V, 10%
46-10312
C7
Capacitor, Ceramic, 330PF 1000V, 10%
45-33113
C8
Capacitor, Ceramic, 560PF 500V, 10%
45-56152
C9
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C10
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C11
Capacitor, Poly, 0.001µF 100V, 10%
46-10212
C12
Capacitor, Ceramic, 560PF 500V, 10%
45-56152
C13
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C14
Capacitor, Mylar, 0.0022µF 400V, 5%
46-22242
C15
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C16
Capacitor, Mylar, 0.01µF 400V, 10%
41-10342
C17
Capacitor, Poly, 0.001µF 100V, 10%
46-10212
C18
Capacitor, Poly, 0.022µF 100V, 10%
46-22312
C19
Capacitor, Ceramic, 250PF 500V, 5%
45-25152
C20
Capacitor, Electrolytic, 1000µF 25V, 20%
47-10225
C21
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C22
Capacitor, Poly, 0.0047µF 100V, 10%
46-47212
C23
Capacitor, Poly, 0.022µF 100V, 10%
46-22312
C25
Capacitor, Poly, 0.0047µF 400V, 10%
41-47242
C26
Capacitor, Ceramic, 250PF 500V, 5%
45-25152
C27
Capacitor, Electrolytic, 1000µF 25V, 20%
47-10225
C28
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C29
Capacitor, Electrolytic, 2200µF 6.3V, 20%
47-22260
C30
Capacitor, Electrolytic, 2200µF 6.3V, 20%
47-22260
C31
Capacitor, Ceramic, 82PF 500V, 5%
45-82052
C32
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C33
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C34
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C35
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C36
Capacitor, Poly, 0.001µF 400V, 10%
46-10242
C37
Capacitor, Poly, 0.01µF 100V, 10%
46-10312
C38
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C39
Capacitor, Poly, 0.001µF 400V, 10%
46-10242
C40
Capacitor, Poly, 0.047µF 100V, 10%
46-47312
C41
Capacitor, Ceramic, 27PF 500V, 5%
45-27052
C42
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C43
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C44
Capacitor, Electrolytic, 47µF 63V, 20%
47-47061
C45
Capacitor, Mylar, 0.047µF 630V, 10%
46-47362
C46
Capacitor, Ceramic, 10PF 500V, 5%
45-10052
C47
Capacitor, Electrolytic, 1000µF 25V, 20%
47-10225
C48
Capacitor, Electrolytic, 22µF 500V, 20%
42-22052
C49
Capacitor, Electrolytic, 22µF 500V, 20%
42-22052
C50
Capacitor, Electrolytic, 22µF 500V, 20%
42-22052
C51
Capacitor, Electrolytic, 22µF 500V, 20%
42-22052
C52
Capacitor, Electrolytic, 22µF 500V, 20%
42-22052
C53
Capacitor, Mylar, 0.047µF 630V, 10%
46-47362
C55
Capacitor, Electrolytic, 2200µF 6.3V, 20%
47-22260
C56
Capacitor, Electrolytic, 22µF 500V, 20%
42-22052
C72
Capacitor, Ceramic, 180PF 500V, 5%
45-18152
C73
Capacitor, Poly, 0.0047µF 100V, 10%
46-47212
D1
Diode, 1N4745A 16V, 1W
60-47450
D2
Diode, 1N4745A 16V, 1W
60-47450
D3
Diode, 1N4745A 16V, 1W
60-47450
D4
Diode, 1N4745A 16V, 1W
60-47450
D5
Diode, 1N4003, 1A 200V
60-40030
D6
Diode, 1N4007A 1000V, 1A
60-10000
D7
Diode, 1N4007A 1000V, 1A
60-10000
D8
Diode, 1N4007A 1000V, 1A
60-10000
D9
Diode, 1N4007A 1000V, 1A
60-10000
D10
Diode, 1N4007A 1000V, 1A
60-10000
D11
Diode, 1N4007A 1000V, 1A
60-10000
D12
Diode, 1N4007A 1000V, 1A
60-10000
D13
Diode, 1N4007A 1000V, 1A
60-10000
D14
Diode, 1N4007A 1000V, 1A
60-10000
D15
Diode, 1N4007A 1000V, 1A
60-10000
D16
Diode, 1N4007A 1000V, 1A
60-10000
D17
LED, Red small, 3mm T-1.0
60-75320
D18
LED, Red small, 3mm T-1.0
60-75320
F1
Fuse Clips, (1 pair)
23-03529
H1A
Conn. Header, 4 Pin Vert, 2.5mm
23-11004
H1B
Conn. Header, 4 Pin Vert, 2.5mm
23-11004
H2A
Conn. Header, 2 Pin Vert, 2.5mm
23-10002
H2B
Conn. Header, 2 Pin Vert, 2.5mm
23-10002
H3A
Conn. Header, 4 Pin Vert, 2.5mm
23-11004
H3B
Conn. Header, 4 Pin Vert, 2.5mm
23-11004
H5A
Conn. Header, 2 Pin Vert, 2.5mm
23-10002
H5B
Conn. Header, 2 Pin Vert, 2.5mm
23-10002
H7A
Conn. Header, 2 Pin Vert, 2.5mm
23-10002
H7B
Conn. Header, 2 Pin Vert, 2.5mm
23-10002
H8
Conn. Header, 4 Pin Vert, 2.5mm
23-11004
J1
Phone Jack, 1/4, 90° Rev Threaded Neck
21-01804
J2
Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
J3
Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
J4
Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
J5
Phone Jack, 1/4, 7 Pin Plastic Stereo, 24mm
21-06457
JMP1 Jumper .35 prep., 0.0
Ω
50-00035
L1
Relay, 30V/2A, 5V DIP DPDT, PCB MNT
70-05305
P1
Potentiometer, B100K, O Shaft, Pot 16, RX.250 90° 71-14052
P2
Potentiometer, B1Meg, O Shaft, Pot 16, RX.250 90° 71-14070
P3
Potentiometer, 25A25K, O Shaft, Pot 16, RX.250 90° 71-14050
P4
Potentiometer, B1Meg, O Shaft, Pot 16, RX.250 90° 71-14070
P5
Potentiometer, 5A500K, O Shaft, Pot 16, RX.250 90° 71-14060
P6
Potentiometer, B1Meg, O Shaft, Pot 16, RX.250 90° 71-14070
P7
Potentiometer, B1Meg, O Shaft, Pot 16, RX.250 90° 71-14070
P8
Potentiometer, 25A25K, O Shaft, Pot 16, RX.250 90° 71-14050
P9
Potentiometer, B1Meg, O Shaft, Pot 16, RX.250 90° 71-14070
P10
Potentiometer, B100K, O Shaft, Pot 16, RX.250 90° 71-14052
P11
Potentiometer, Trimmer, 20K, PCB MTG
71-22012
P15
Potentiometer, 5A500K, O Shaft, Pot 16, RX.250 90° 71-14060
PL1
Receptacle AC, Jack AC w/ 20mm Fuse
21-02804
Q1
Transistor, 2N5550 NPN, 250V, TO-92
60-55500
Q2
Regulator, 7805 +5V, 1A
60-78050
QC1
Spade Terminal, QC Vertical, 0.205
06-40045
QC2
Spade Terminal, QC Vertical, 0.205
06-40045
QC3
Spade Terminal, QC Vertical, 0.205
06-40045
QC4
Spade Terminal, QC Vertical, 0.205
06-40045
QC5
Spade Terminal, QC Vertical, 0.250
06-40050
QC6
Spade Terminal, QC Vertical, 0.250
06-40050
QC7
Spade Terminal, QC Vertical, 0.250
06-40050
QC8
Spade Terminal, QC Vertical, 0.250
06-40050
QC9
Spade Terminal, QC Vertical, 0.250
06-40050
QC10 Spade Terminal, QC Vertical, 0.250
06-40050
QC11 Spade Terminal, QC Vertical, 0.250
06-40050
QC12 Spade Terminal, QC Vertical, 0.250
06-40050
QC13 Spade Terminal, QC Vertical, 0.250
06-40050
QC14 Spade Terminal, QC Vertical, 0.250
06-40050
QC15 Spade Terminal, QC Vertical, 0.250
06-40050
QC16 Spade Terminal, QC Vertical, 0.250
06-40050
QC17 Spade Terminal, QC Vertical, 0.250
06-40050
QC18 Spade Terminal, QC Vertical, 0.250
06-40050
QC19 Spade Terminal, QC Vertical, 0.250
06-40050
QC26 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC27 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC28 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC29 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC31 Spade Terminal, QC Vertical, 0.250
06-40050
QC32 Spade Terminal, QC Vertical, 0.250
06-40050
QC33 Spade Terminal, QC Vertical, 0.250
06-40050
QC34 Spade Terminal, QC Vertical, 0.250
06-40050
QC35 Spade Terminal, QC Vertical, 0.250
06-40050
QC36 Spade Terminal, QC Vertical, 0.250
06-40050
QC40 Spade Terminal, QC Vertical, 0.250
06-40050
QC41 Spade Terminal, QC Vertical, 0.250
06-40050
QC42 Spade Terminal, QC Vertical, 0.250
06-40050
QC43 Spade Terminal, QC Vertical, 0.250
06-40050
QC50 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC51 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC52 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC53 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC54 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC55 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
QC56 Spade Terminal, QC 90° Horizontal, 0.250
06-40060
R1
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R2
Resistor, 1.5K, .35 prep., 5% Carbon
50-15035
R3
Resistor, 220K .5W, 0.5 prep., 5% Carbon
52-22055
R4
Resistor, 150K, .35 prep., 5% Carbon
50-15055
R5
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R6
Resistor, 1.5K, .35 prep., 5% Carbon
50-15035
R7
Resistor, 220K .5W, 0.5 prep., 5% Carbon
52-22055
R8
Resistor, 2.2M, .35 prep., 5% Carbon
50-22065
R9
Resistor, 1.5K, .35 prep., 5% Carbon
50-15035
R10
Resistor, 220K .5W, 0.5 prep., 5% Carbon
52-22055
R11
Resistor, 47K, .35 prep., 5% Carbon
50-47045
R12
Resistor, 1.5K, .35 prep., 5% Carbon
50-15035
R13
Resistor, 220K .5W, 0.5 prep., 5% Carbon
52-22055
R14
Resistor, 150K, .35 prep., 5% Carbon
50-15055
R15
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R16
Resistor, 22K, .35 prep., 5% Carbon
50-22045
R17
Resistor, 22K, .35 prep., 5% Carbon
50-22045
R18
Resistor, 3.3K, .35 prep., 5% Carbon
50-33035
R19
Resistor, 100K, 0.5 prep., 5% Carbon
51-10055
R20
Resistor, 180K, .35 prep., 5% Carbon
50-18055
R21
Resistor, 22K, .35 prep., 5% Carbon
50-22045
R22
Resistor, 0.56
Ω, .35 prep., 5% Carbon
50-05605
R23
Resistor, 150
Ω, .35 prep., 5% Carbon
50-15025
R24
Resistor, 470
Ω, .35 prep., 5% Carbon
50-47025
R25
Resistor, 2.2K, .35 prep., 5% Carbon
50-22035
R27
Resistor, 100
Ω, .35 prep., 5% Carbon
50-10025
R28
Resistor, 100
Ω, .35 prep., 5% Carbon
50-10025
R29
Resistor, 0.56
Ω, .35 prep., 5% Carbon
50-05605
R30
Resistor, 0.56
Ω, .35 prep., 5% Carbon
50-05605
R31
Jumper, 0.0
Ω 0.35 prep.
50-00035
R32
Resistor, 2.2M, .35 prep., 5% Carbon
50-22065
R33
Resistor, 220
Ω, .35 prep., 5% Carbon
50-22025
R34
Resistor, 47K 1W, 0.8 prep., 5% Carbon
53-47045
R35
Resistor, 2.2M, .35 prep., 5% Carbon
50-22065
R36
Resistor, 220K, .35 prep., 5% Carbon
50-22055
R37
Resistor, 1.5K, .35 prep., 5% Carbon
50-15035
R38
Resistor, 220K .5W, 0.5 prep., 5% Carbon
52-22055
R39
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R40
Resistor, 1.0M, .35 prep., 5% Carbon
50-10065
R41
Resistor, 1.5K, .35 prep., 5% Carbon
50-15035
R42
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R43
Resistor, 22K, .35 prep., 5% Carbon
50-22045
R44
Resistor, 22K, .35 prep., 5% Carbon
50-22045
R45
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R46
Resistor, 560
Ω, .35 prep., 5% Carbon
50-56025
R47
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R48
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R49
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R50
Resistor, 220K, .35 prep., 5% Carbon
50-22055
R51
Resistor, 220K, .35 prep., 5% Carbon
50-22055
R52
Resistor, 220K, .35 prep., 5% Carbon
50-22055
R53
Resistor, 22K, .35 prep., 5% Carbon
50-22045
R54
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R55
Resistor, 4.7K 1W, 0.8 prep., 5% Carbon
53-47035
R56
Resistor, 2.2K 1W, 0.8 prep., 5% Carbon
53-22035
R57
Resistor, 350
Ω 10W SDOF, Sand Bar, 10%
56-35010
R58
Resistor, 0.56
Ω, .35 prep., 5% Carbon
50-05605
R59
Resistor, 0.56
Ω, .35 prep., 5% Carbon
50-05605
R60
Resistor, 0.56
Ω, .35 prep., 5% Carbon
50-05605
R61
Resistor, 100K, .35 prep., 5% Carbon
50-10055
R70
Resistor, 4.7K, .35 prep., 5% Carbon
50-47035
R71
Resistor, 4.7K, .35 prep., 5% Carbon
50-47035
R72
Resistor, 350
Ω 5W SDOF, Sand Bar, 5%
56-35025
R73
Resistor, 350
Ω 5W SDOF, Sand Bar, 5%
56-35025
R74
Resistor, 4.7K, .35 prep., 5% Carbon
50-47035
R75
Resistor, 4.7K, .35 prep., 5% Carbon
50-47035
R76
Resistor, 350
Ω 5W SDOF, Sand Bar, 5%
56-35025
R77
Resistor, 350
Ω 5W SDOF, Sand Bar, 5%
56-35025
R78
Resistor, 100
Ω, .35 prep., 5% Carbon
50-10025
R79
Resistor, 100
Ω, .35 prep., 5% Carbon
50-10025
R91
Resistor, 10K, .35 prep., 5% Carbon
50-10045
R92
Resistor, 470K, .35 prep., 5% Carbon
50-47055
R93
Resistor, 22K, .35 prep., 5% Carbon
50-22045
S1
Switch, DP3T Lft Tall Bat, PCB MTG
25-76286
S2
Switch, DPDT Lft sm Bat, DPDT, PCB MTG
25-62656
S3
Switch, DPDT Lft Tall Bat, DPDT, PCB MTG
25-62657
S6
Switch, DPDT 90° Lg, Chassis, PCB MTG
25-32833
S7
Switch, DPDT 90° Lg, Chassis, PCB MTG
25-32833
Switch, Stand By, Switch LG DPDT, STAND BY
25-31350
Switch, ON / OFF, Power with Light
25-31353
SPK1 Phone Jack, 1/4, 7 Pin Plastic Stereo, 0.25, 24mm
21-06457
SPK2 Phone Jack, 1/4, 7 Pin Plastic Stereo, 0.25, 24mm
21-06457
T1
Transformer, 120V power
15-10711
T2
Transformer, Output
15-02116
V1
Socket For Tube, 12AX7A 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type 12AX7
65-00127
V2
Socket For Tube, 12AX7A 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type 12AX7
65-00127
V3
Socket For Tube, 12AX7A 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type 12AX7
65-00127
V4
Socket For Tube, 12AX7A 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type 12AX7
65-00127
V5
Socket For Tube, 12AX7A 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type 12AX7
65-00127
V6
Socket For Tube, 5881, 8 Pin, PCB MTG
23-26400
Vacuum Tube, Type 5881
65-05881
V7
Socket For Tube, 5881, 8 Pin, PCB MTG
23-26400
Vacuum Tube, Type 5881
65-05881
V8
Socket For Tube, 5881, 8 Pin, PCB MTG
23-26400
Vacuum Tube, Type 5881
65-05881
V9
Socket For Tube, 5881, 8 Pin, PCB MTG
23-26400
Vacuum Tube, Type 5881
65-05881
REPLACEMENT PARTS LIST
(for circuit cards)
This symbol is intended to
alert the user to the pres-
ence of uninsulated “dan-
gerous voltage” within the
alert the user to the pres-
ence of uninsulated “dan-
gerous voltage” within the
product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of
electric shock to persons.
ficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intend-
ed to alert the user to
the presence of impor-
tant operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
ed to alert the user to
the presence of impor-
tant operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
LIMITED WARRANTY
Your Carvin product is guaranteed against failure for ONE YEAR unless otherwise stated. Vacuum
tubes are guaranteed for 90 days. Carvin will service and supply all parts at no charge to the cus-
tomer providing the unit is under warranty. Shipping costs are the responsibility of the customer.
CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE
ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility
for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is
assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable
care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties,
expressed or implied. No representative or person is authorized to represent or assume for Carvin
any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
tomer providing the unit is under warranty. Shipping costs are the responsibility of the customer.
CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE
ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility
for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is
assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable
care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties,
expressed or implied. No representative or person is authorized to represent or assume for Carvin
any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
When RETURNING merchandise to the factory, you may call for a return authorization number.
Describe in writing each problem. If your unit is out of warranty, you will be charged the current FLAT
RATE for parts and labor to bring your unit up to factory specifications.
RATE for parts and labor to bring your unit up to factory specifications.
HELP SECTION
1) AMP WILL NOT TURN ON
1) AMP WILL NOT TURN ON
Check the power to the amp. Check for tripped circuit breakers, unplugged extension cords or
power-strip switches that may be turned off. Check the fuse. If a dark brownish color or no wire
can be seen within the glass tube, then replace. The amp may be perfectly fine but occasionally
a fuse may blow because of high AC voltage surges. After the fuse has been replaced with the
proper Slow Blow value and if the fuse fails again, the amp will require servicing.
power-strip switches that may be turned off. Check the fuse. If a dark brownish color or no wire
can be seen within the glass tube, then replace. The amp may be perfectly fine but occasionally
a fuse may blow because of high AC voltage surges. After the fuse has been replaced with the
proper Slow Blow value and if the fuse fails again, the amp will require servicing.
2) NO OUTPUT with POWER LIGHT ON
Tubes damaged in shipping will be the primary reason for your amp to not function properly.
Please give us a call to help guide you through this simple repair.
Please give us a call to help guide you through this simple repair.
3) KEEP YOUR AMP LOOKING NEW
Use a damp cloth to wipe the controls on the front & rear chassis panels. Wipe the black vinyl
covering with a damp cloth.
covering with a damp cloth.