Руководство По Подключению для Pentax optio 33wr
16
1
Double-click the [Unplug or
eject hardware] icon in the task
eject hardware] icon in the task
bar recognized area.
The [Remove Hardware] screen will
appear.
appear.
2
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
DISK Device] is selected and
click [Stop].
The [Stop Hardware Device] screen
will appear.
will appear.
3
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
DISK Device] is selected and
click [OK].
A message will appear.
4
Click [OK].
5
Turn off the camera and
disconnect the USB cable from your camera and PC.
disconnect the USB cable from your camera and PC.
Disconnecting the Camera from your PC
Windows 2000 / Me
The computer is downloading the camera’s image data with the camera is
connected to the computer and the camera flash status lamp (red) is
connected to the computer and the camera flash status lamp (red) is
flashing. Image data may be damaged if you disconnect the camera
during such conditions.
In the event that an error message is displayed in Step 4, confirm that
during such conditions.
In the event that an error message is displayed in Step 4, confirm that
the flash status lamp has turned off and then disconnect the camera.