Руководство По Работе для Pentax Optio W80
112
3
Ta
kin
g
kin
g
Pictur
es
You can set this function to correct for camera shake when taking still
shots. If Pixel Track SR is set to O (On), the camera automatically
corrects for camera shake in the images you shot. The default setting is
P
shots. If Pixel Track SR is set to O (On), the camera automatically
corrects for camera shake in the images you shot. The default setting is
P
(Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track SR].
3
Use the four-way controller (45) to
switch between O (On) or P (Off).
switch between O (On) or P (Off).
O
(On)
Automatically corrects for
camera shake.
camera shake.
P
(Off)
No correction for camera
shake.
shake.
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
Setting Pixel Track SR
Shake reduction settings in C (Movie) and
(Underwater Movie)
mode are configured under Movie SR (p.139).
In the following situations Pixel Track SR is turned off and cannot be
selected.
• If the shooting mode is C (Movie)/
selected.
• If the shooting mode is C (Movie)/
(Underwater Movie)/X
(Digital Wide)/C (Half-length Portrait)/S (Fireworks)/F (Digital
Panorama)/N (Frame Composite).
Panorama)/N (Frame Composite).
• When Voice Recording has been assigned to the Green Button and is
being used.
• If the Drive Mode is j (Continuous Shooting)/c (Burst Shooting)/g
(10 sec. self-timer)/k (Interval Shoot)/l (Auto Bracket).
• When the flash is used.
• When sensitivity is set to 3200/6400. Or, when sensitivity is set to
• When sensitivity is set to 3200/6400. Or, when sensitivity is set to
3200/6400 by AUTO sensitivity.
Rec. Mode
MENU
Exit
1 / 4
Recorded Pixels
Quality Level
Quality Level
White Balance
AWB
12M
Image Tone
Bright
AF Setting
Pixel Track SR
e_kb485.book Page 112 Friday, July 3, 2009 9:18 AM