Руководство По Работе для Pentax Optio W80

7

You can save battery power by setting the display to dim automatically 
when no operation is performed for a fixed time. After the power saving 
function has been activated, the display returns to the ordinary 
brightness if any button is pressed.

1

Press the 3 button in Q mode.

The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way 
controller (5) once.

2

Use the four-way controller (23) to select [Power 
Saving].

3

Press the four-way controller (5).

A pull-down menu appears.

4

Use the four-way controller (23) 
to select the time until the camera 
enters power saving mode.

Choose from [2min.], [1min.], [30sec.], 
[15sec.], [5sec.] or [Off].

5

Press the 4 button.

The setting is saved.

• Power Saving does not function in the following situations:

• While taking pictures in the continuous shooting mode
• In the playback mode
• During movie recording/playback
• While the camera is connected to a computer
• When using the AC adapter
• While a menu is being displayed
• While using the VIDEO output

• When no operation is performed after the camera is turned on, Power 

Saving is activated only after 15 seconds elapse even if [5sec.] is set.

e_kb485.book  Page 215  Friday, July 3, 2009  9:18 AM