Руководство По Работе для Pentax Optio W80
33
1
Gett
ing Started
Powering the Camera
Use the supplied battery charger (D-BC78) to charge the supplied rechargeable
lithium-ion battery (D-LI78) before using it in the camera for the first time or after
a long period of non-use, or when the [Battery depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7A, minimum 6 ft (1.8 m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.
When charging is finished, the charging indicator turns off.
4
Remove the battery from the battery charger when
charging is finished.
Charging the Battery
• Do not charge batteries other than the rechargeable lithium ion D-LI78
battery using the supplied D-BC78 battery charger. Doing otherwise
may cause damage or overheating.
may cause damage or overheating.
• The battery has reached the end of its service life when it starts to run
down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace it with a new battery.
Battery charger
Charging indicator
While charging: Lights
Charging finished: Turns off
While charging: Lights
Charging finished: Turns off
3
Battery
AC plug
cord
1
2
To power
outlet
e_kb485.book Page 33 Friday, July 3, 2009 9:18 AM