Руководство По Работе для Pentax Optio W80

camera is subjected to the vibrations of a motorbike, car, ship, etc. If the 
camera is subjected to substantial vibrations, shocks, or pressure, take 
your camera to your nearest PENTAX Service Center and have it checked.

• The temperature range in which the camera can be used is -10°C to 40°C 

(14°F to 104°F).

• The liquid crystal display will become black at high temperatures but will 

return to normal at normal temperatures.

• The response speed of the liquid crystal display becomes slow at low 

temperatures. This is due to the properties of the liquid crystal and is not a 
malfunction.

• If the camera is subjected to rapid temperature changes, condensation 

may form on the inside and outside of the camera. Therefore put the 
camera in a bag or plastic bag and take the camera out when the difference 
in temperature has subsided.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. 

These could cause the camera to breakdown. Wipe dry any rain or water 
drops on the camera. 

• Please do not press forcefully on the display. This could cause it to break 

or malfunction.

• Be careful not to sit down with the camera in your back pocket as this may 

damage the exterior of the camera or the display.

• When using a tripod with the camera, be careful not to overtighten the 

screw in the tripod socket on the camera.

• Do not clean the product with organic solvents such as thinner, alcohol or 

benzene.

• Use a lens brush to remove dust accumulated on the lens. Never use a 

spray blower for cleaning as it may damage the lens.

• Avoid storing the camera where pesticides and chemicals are handled. 

Remove the camera from its case and store it in a well-ventilated place to 
prevent the camera from becoming moldy during storage.

e_kb485.book  Page 6  Friday, July 3, 2009  9:18 AM