Руководство По Работе для Pentax Optio W80
94
3
Ta
kin
g
kin
g
Pictur
es
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter release
button pressed.
button pressed.
• The flash does not discharge in j and c modes.
• j and c cannot be selected in 9 (Green),
• j and c cannot be selected in 9 (Green),
b (Auto Picture), A
(Night Scene), C (Movie),
(Underwater Movie), S (Fireworks),
N
(Frame Composite), X (Digital Wide) or F (Digital Panorama)
modes.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity
is set to 3200 and higher.
• With j, you can continue shooting until the memory capacity of the
SD Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and
[Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Recognition function is activated (p.73), it works only
• When the Face Recognition function is activated (p.73), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f in Burst Shooting. When
• The number of recorded pixels is fixed at f in Burst Shooting. When
the shooting mode is set to
(Report), the number of recorded
pixels is set to
V (1280×960).
e_kb485.book Page 94 Friday, July 3, 2009 9:18 AM