Руководство По Работе для Panasonic KXMB2001GX
Display
Cause & Solution
“EMAIL SIZE OVER”
R When performing scan to email address, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“FILE SIZE OVER”
R When performing scan to FTP server or scan to SMB folder, the total file
size of scanned data exceeded the file size limitation. Divide the document
into sections.
into sections.
“KEEP COPYING”
R Copying has stopped due to some existing problem (Example: a lack of
recording paper or a recording paper jam). See the other displayed message
instructions to continue copying.
instructions to continue copying.
“LOW TEMP.”
R The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“MEMORY FULL”
R When making a copy, the document being stored exceeded the memory
capacity of the unit. Press MStopN to clear the message. Divide the
document into sections.
document into sections.
“OUT OF PAPER INPUT TRAY
#2”
#2”
R Recording paper is not loaded in the manual input tray. Load paper
“PAPER IN TRAY #2”
“PAPER JAMMED”
“OPEN TOP COVER”
“OPEN TOP COVER”
“PC FAIL OR BUSY”
R The cable between the unit and the computer is not connected correctly.
Check the connections (page 15, 20).
R The computer has some kind of problem. (Example: Make sure that the
computer is turned ON.)
R The Multi-Function station’s scan application is not running correctly on the
computer. Restart your computer and try again.
“PLEASE WAIT”
R The unit is warming up. Wait for a while.
“REMOVE DOCUMENT”
R The document is jammed. Remove the jammed document (page 69).
R Attempted to send or copy a document longer than 600 mm using the
R Attempted to send or copy a document longer than 600 mm using the
automatic document feeder. Press MStopN to remove the document. Divide
the document into two or more sheets and try again.
the document into two or more sheets and try again.
R The ADF top cover is not fully closed. Push firmly on the front and rear edges
of the ADF top cover, and then feed the document again.
“SLEEP”
R After the unit has been in power save mode (feature #403 on page 40) for
up to 5 minutes, the unit will enter sleep mode. Press a key to standby the
unit for the next process.
unit for the next process.
“TONER EMPTY”
“CHANGE SUPPLIES”
“CHANGE SUPPLIES”
R The toner is empty. Replace the toner cartridge immediately.
“TONER LOW”
“CHANGE SUPPLIES”
“CHANGE SUPPLIES”
R The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.
“TOP COVER OPEN”
R The top cover is open. Close it.
55
8. Help