Руководство По Работе для Panasonic NA-168VS4
2 - Read Before Using
Electrical Connection (UK and Republic of Ireland only)
For your safety, read the following text
carefully.
This appliance is supplied with a moulded
This appliance is supplied with a moulded
3-pin mains plug for your safety and
convenience.
A 13-ampere fuse is fitted in this plug.
Should the fuse need to be replaced,
ensure that the replacement fuse has
a rating of 13 amperes and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI
mark on the body of the fuse.
If the plug contains a removable fuse
cover, ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover, do not use the
plug until a replacement fuse cover is
purchased at your local dealer.
WARNING
If the fitted moulded plug is
If the fitted moulded plug is
unsuitable for the mains socket in
your home then the fuse should be
removed and the plug cut off and
disposed of safely.
There is a danger of severe
There is a danger of severe
electrical shock if the cut off plug is
inserted into any 13-ampere socket.
How to replace the fuse
The location of the fuse differs depending
on the type of AC mains plug (Figures A
and B).
Confirm the AC mains plug is fitted and
follow the instructions below. Illustrations
may differ from the actual AC mains plug.
Open the fuse cover with a screwdriver
and replace the fuse and close or attach
the fuse cover.
- Figure A
- Figure B
NA-140_168_148VS4_WGB_En.indb 2
2013/11/06 19:06:35