Руководство По Работе для Panasonic PT-L735NTE
E
NGLISH
-47
Adjustments
and
settings
CONTROL KEY
To disable the buttons on the
projector, set CONTROL KEY to
“OFF”. A confirmation screen will
then be displayed. Select “OK” by
using I and H buttons. To use the
buttons on the projector, set to “ON”
by using the remote control unit.
projector, set CONTROL KEY to
“OFF”. A confirmation screen will
then be displayed. Select “OK” by
using I and H buttons. To use the
buttons on the projector, set to “ON”
by using the remote control unit.
AUTO POWER OFF
If any signal is not input into the
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you don't
use this feature, set it to “DISABLE”.
This feature will not function under
the following situation.
1) When using the freeze function.
2) When the NETWORK or SD
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you don't
use this feature, set it to “DISABLE”.
This feature will not function under
the following situation.
1) When using the freeze function.
2) When the NETWORK or SD
CARD is selected (PT-L735NTE
only).
only).
3) When writing the data in the SD
memory card (PT-L735NTE
only).
only).
NOTE:
(PT-L735NTE only)
B When the projector is connected
(PT-L735NTE only)
B When the projector is connected
to a personal computer by
means of the wireless network
using the accessory wireless
card, the projector will go in the
WEB STANDBY. (page 48)
means of the wireless network
using the accessory wireless
card, the projector will go in the
WEB STANDBY. (page 48)