Руководство По Работе для Panasonic PT-L735NTE

NOTE:
B Place the projector on top of a

soft cloth so that it will not
become scratched.

NOTE:
B Be sure to install the air filter

cover before using the
projector. If the projector is
used without the air filter cover
installed, dust and other
foreign particles will be drawn
into the projector, and
malfunctions will result.

B If the dust cannot be removed

by cleaning, it is time to
replace the air filter. Please
consult your dealer.
Furthermore, if the lamp unit is
being replaced, replace the air
filter at this time also.

If the air filter becomes clogged with dust, the internal temperature of the
projector will rise, the TEMP indicator will flash and the projector power will
turn off. The air filter should be cleaned after every 100 hours of use.

# Turn off the MAIN POWER

switch and disconnect the
mains lead plug from the mains
socket.
Turn off the MAIN POWER switch
according to the procedure given
in “Turning off the power” on
page 25 before disconnecting the
plug from the mains socket.

$ Gently turn the projector

% Remove the air filter.

Put your fingernails under the air
filter and pull the air filter out of
the projector.

& Clean the air filter.

Soak the air filter in water and
wash out dirt by hand.

' Dry the air filter and install it to

NOTE:
B Do not use detergent.
B Be careful not to separate the

air filter cover from the frame
when washing the air filter.