Руководство По Работе для Panasonic CU5E34PBE

14

Cleaning instructions 

For Z, XZ, MZ indoor unit

• Switch off the power supply and unplug before 

cleaning.

• Do not touch the aluminium fi n, sharp parts may 

cause injury.

• Do not use benzine, thinner or scouring powder.
• Use only soap (  pH 7) or neutral household 

detergent.

• Do not use water hotter than 40 °C.

Wipe the unit gently with a soft, 
dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a sharp 
object. This can lead to damage and malfunction.

Wash gently and dry.

1   Release the 

hooks at 
both ends.

2    Pull out and lift up.

1   Insert 

at both 
sides.

2   Push in.

3  Close down.

4  Press both ends and center of the front panel.

Once every 2 weeks

• Wash/rinse the fi lters gently 

with water to avoid damage to 
the fi lter surface.

• Dry the fi lters thoroughly under shade, away 

from fi re or direct sunlight.

• Replace any damaged fi lters.
Remove air fi lter

Insert into the unit

For seasonal inspection after extended 
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/

HEAT operation. After 15 minutes of 
operation, it is normal to have the following 
temperature difference between air inlet and 
air outlet vents: 

COOL: ≥ 8 °C

  

HEAT: ≥ 14 °C

For extended non-use
• Activate HEAT mode for 2~3 hours to remove 

moisture left in the internal parts thoroughly to 
prevent mould growth.

• Turn off the power supply and unplug.
• Remove the remote control batteries.

Aluminium fi n

Front panel

Air fi lters

Human activity 
sensor