Руководство По Работе для Panasonic ESST3N

20

Shaver does not operate 
even after charging.

Use the appliance in an ambient 
temperature approximately 5 °C 
or higher.
The battery has reached the 
end of its life.
The shaver will not operate with 
the AC adaptor connected. 
Please use the shaver after it has 
been sufficiently charged and the 
AC adaptor disconnected.

The driving sound 
changes while shaving.

The shaving sensor is operating. 
The sound changes depending 
on the beard thickness.

Makes a loud sound.

Apply oil.
The blades will not move 
smoothly when there is no oil 
on the blades, requiring more 
power.
The shaver makes a high‑pitched 
sound due to the linear motor 
drive. This does not indicate a 
problem.
Confirm that the blades are 
properly attached.
Clean the system outer foil with 
the brush.

The odor is getting 
stronger.

This can be improved by 
cleaning every time after shaving.

The shaver cannot be 
properly cleaned even 
after water is poured 
from the water inlet.

When the shaver is very dirty, 
first use the cleaning brush to 
remove beard trimmings.
Or, remove the foil frame and 
wash with water.
(See page 16.)

Shavings fly out in all 
directions.

This can be improved by 
cleaning every time after shaving.
Clean the inner blades with the 
brush when shavings are 
adhering to the inner blades.
Confirm that the cleaning 
shutter is firmly closed.

System outer foil gets hot.

Apply oil.
Replace the system outer foil if 
it is damaged or deformed. 
(See page 18.)

You do not get as close 
a shave as before.

Apply oil.
This can be improved by 
cleaning every time after shaving.
Replace the system outer foil 
and/or inner blades.
Expected life of system outer 
foil and inner blades:
System outer foil:

Approximately 1 year

Inner blades:

Approximately 2 years